Compte / ConnexionAccount / Sign inKonto / AnmeldenCuenta / Iniciar sesión
NOMVEXTECH
NOMVEX TECH / CAMERA PLANNER

Plan the shoot. Avoid the storage surprise.

Multiple cameras, a long session and memory cards to plan. Enter your recording settings and get a clear estimate before you shoot.

01 / YOUR SETUP

How much data should you plan for?

Enter the video bitrate shown by your camera for this recording mode. The values below are an example to replace; resolution alone does not determine file size.

Data / session, all cameras—
Total including margin—
Cards / camera for one session—
Copy time for one session—

Decimal calculation: 1 GB = 1,000 MB; 8 bits = 1 byte. Real files vary with codec, variable bitrate, audio, exact duration and available card capacity. Make an independent backup before clearing cards.

02 / THE WORKFLOW

One shoot, three checks.

01 / CAPTURE

Before recording

Make a test clip in the exact mode you will use. Read its bitrate or measure its file size, then note frame rate and duration.

02 / OFFLOAD

During transfer

Name files by camera and session. Check that they open and have full duration before reclaiming card space.

03 / BACKUP

After the session

Keep a second copy on separate storage and note missing shots. The calculator margin plans space; it is not a backup.

03 / PRACTICAL PLANNING

Understand and validate your storage estimate

Bitrate, not simply 4K resolution, determines required storage. For one camera, multiply the bitrate in megabits per second by the duration in seconds, then divide by eight to obtain megabytes. The calculator uses decimal units. Two cameras shooting in 4K can create very different files depending on their codec, frame rate and quality settings.

Before the session, record a short test clip on each camera in the exact planned mode. Check the file’s average bitrate and measure its size rather than assuming that identical presets always produce identical results. Variable bitrates, audio tracks and interrupted recordings can change actual volumes. Increase the storage margin when your project has uncertainties.

Plan memory cards for each camera because cards cannot be shared between cameras recording simultaneously. Compare the actual available card capacity with the estimated file size and keep spare cards. Transfer time depends on the sustained speed of the reader, card and destination disk; advertised manufacturer speeds are not always achieved.

After each shoot, check that files play and have the expected duration, then keep at least two copies on separate storage devices before clearing cards. The calculated storage margin is not a backup, and the number of cards shown is an estimate. Export your results and recalculate whenever duration, camera count or video mode changes.